|
|
Line 1: |
Line 1: |
| + | = Solar Cells = |
| + | |
| A solar cell or photovoltaic cell is a device that converts light directly into electricity by the photovoltaic effect. | | A solar cell or photovoltaic cell is a device that converts light directly into electricity by the photovoltaic effect. |
| | | |
Line 18: |
Line 20: |
| | | |
| Source: [http://www.iea-pvps.org/pv/snapshot/techproc.htm IEA PVPS] | | Source: [http://www.iea-pvps.org/pv/snapshot/techproc.htm IEA PVPS] |
| + | |
| + | <br> |
| + | |
| + | = Solar Modules = |
| | | |
| <br> | | <br> |
| | | |
| [[Category:Solar]] | | [[Category:Solar]] |
Revision as of 11:27, 24 June 2009
Solar Cells
A solar cell or photovoltaic cell is a device that converts light directly into electricity by the photovoltaic effect.
Single crystal PV cells are manufactured using a single-crystal growth method and have commercial efficiencies between 15 % and 18 %.
Multicrystalline cells, usually manufactured from a melting and solidification process, are less expensive to produce but are marginally less efficient, with conversion efficiencies around 14 %.
PV cells made from ribbons demonstrate an average efficiency around 14 %.
Thin film cells, constructed by depositing extremely thin layers of photovoltaic semi-conductor materials onto a backing material such as glass, stainless steel or plastic, show stable efficiencies in the range of 7 % to 13 %. Thin film materials commercially used are amorphous silicon (a-Si), cadmium telluride (CdTe), and copper-indium-gallium-diselenide (CIGS).
Commercially available thin film modules:
- Are potentially cheaper to manufacture than crystalline cells
- Have a wider customer appeal as design elements due to their homogeneous appearance
- Present disadvantages, such as low-conversion efficiencies and requiring larger areas of PV arrays and more material (cables, support structures) to produce the same amount of electricity
Source: IEA PVPS
Solar Modules